Deutsch English
Startseite » Katalog » RX ANTENNEN » HiZ4-8PRO Warenkorb | Kasse
Bei Fragen, Anregungen oder Problemen können Sie uns jederzeit kontaktieren.

Telefonisch erreichen Sie uns
Mo. - Fr. von 09.00 - 18.00 Uhr:

Telefon: +49 4346 / 601450

Sie haben noch keine Artikel in Ihrem Warenkorb.
Hersteller Info  
Hi-Z Antennas
Hi-Z Antennas Homepage
Mehr Artikel
      Erweiterte Suche »
Hi-Z 4-8PRO Eight Element Tri-Band Array System Sie haben Fragen zu diesem Produkt?  Nehmen sie sofort Kontakt mit uns auf »
Hi-Z 4-8PRO Eight Element Tri-Band Array System

Hi-Z 4-8PRO Eight Element Tri-Band Array System
procontroller.jpg    prolayout.jpg


·        8 Directions, every 45 degrees

·        Hi-Z 4-8PRO as a new install with Hi-Z PLUS-6 amps

·        Field upgrade of existing Hi-Z 4 systems to Hi-Z 4-8PRO UP

·        Pushing the envelope of best performance in the smallest possible footprint


·        Substantially reduced signal attenuation at directional overlap points

·        160, 80, 40 meters coverage

·        E-Probe design, no need for radials (we do not use passive elements)

·        Uses the same area of the Hi-Z 4 (80ft. sq.) footprint or 113 foot diameter circle, just add 4 more elements

     Special note: The 4-8PRO can be scaled to fit in a smaller footprint for more space restricted locations with only a very minimal decrease in 160 meter performance. The smallest area that can be accomplished is a 42.5 foot radius or 85 foot diameter circle.


From years of design excellence and pushing the boundaries, we came up with a no compromise design. Trying to use a 4 element system for 8 directions creates too many compromises and limited performance typically in the 4 directions at 45 degrees to the diagonals. This was not an option. The standard 4 element RX array system has an inherent weakness at the 4 overlap points. For example, when clicking between NE and SE directions, trying to listen to a signal from the East, this signal would typically be down by >4db as it is in the overlap region. The goal was to have the directional RDF of the standard Hi-Z 4 (12.2RDF) in 8 directions with minimal attenuation at the overlap. Another design goal was to make it upgradeable with existing Hi-Z 4 installs as simple as possible. Since the Hi-Z 4 is typically installed in an 80 foot square pattern (this is a 113.12 foot diameter circle), one only needs to add the 4 additional elements in-between the existing 4 elements. This will maintain the same radius for all elements.

The plots below compare the attenuation at the overlap of the 4 element to the overlap of the 8 element design. The 8 element plot shows the overlap points  attenuation to be only  ~1db. Therefore one gains >3db at the overlap points, not to mention the 8 direction control.

 4 Element overlap pattern         Hi-Z 4-8PRO overlap pattern


8 Circle Array Layout of Verticals


Sie haben Fragen zu diesem Produkt?  Nehmen sie sofort Kontakt mit uns auf »
1.522,70 EUR incl. 19 % MWSt
1.279,58 EUR Exportpreis - ausserhalb Europa

AGB Impressum Index Kontakt Datenschutzerklärung 

Site Encrypted by GeoTrustSSL Secure Credit Card Payments by Saferpay Site Verfied by SiteLock

IBAN International Bank Transfer Master Card PayPal Homepage-Sicherheit

Website by: OCTIC

Parse Time: 0.026s